{"title":"Leveling Wedges \u0026 Spacers","description":"","products":[{"product_id":"5-degree-leveling-wedge","title":"5 degree leveling wedge","description":"\u003cp\u003eNOTE: This wedge will work with the 45”- 47\" versions of all motors listed below without a spacer. The MOVE will have approximately 3” of overhang on the front end. The ULTREX QUEST will have approximately 1\/2” of overhang on each side of the wedge. The leveling wedge will work with Ultrex, Ultrex Quest, MinnKota Fortrex, Lowrance Ghost, Garmin Force, PP MOVE. The 5 degree wedge is perfect for 2004 and newer Triton boats and other brands that need a drastic adjustment to the trolling motor angle. (If you are needing a leveling wedge for a 1997-2003 Triton Tr19\/20\/21, you need the 2.5 degree wedge to clear the longer bow shrouds used on these early model boats) This item includes all hardware for installation. *Our wedges are not compatible with quick release brackets* If you are installing a 52\" or longer motor, you may need to add one of our 1\/4\" spacers to ensure clearance. Check to see if your motor bracket will hit the top cap of your boat if the motor is laid back 2\". If so, then you may want to consider picking up the 1\/4\" spacer (found in this same leveling wedge\/spacer category on the website). All sales final on leveling wedges, so please make sure you make the correct selection for your particular needs. All of our wedges are designed to use the inside hole patterns on most major brand trolling motor mounts. They will not accommodate the outside mounting holes that are sometimes found along the very outside edges of some motor mounts\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":48341281800346,"sku":"AMP-FLL-SZ-LVL","price":235.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/2493\/9674\/files\/5DegreeLevelingWedge.png?v=1783554885"},{"product_id":"2-5-degree-leveling-wedge","title":"2.5 degree Leveling Wedge","description":"\u003cp\u003e(The MOVE will have approximately 3” of overhang on the front end. The ULTEX QUEST will have approximately 1\/2” of overhang on each side of the wedge.) For fishermen to get 100% true return from their trolling motor transducer, the trolling motor needs to as close to level as possible when deployed, hence the need for the leveling wedge. This wedge will come with all the necessary stainless hardware for installation. For bass boat owners who may not need a full 5 degree adjustment to level their trolling motors, this is the answer.  This particular leveling wedge was designed for 1997-2003 TR 19\/20\/21 Triton boats that have the long bow shrouds up front.  The five degree wedge causes the trolling motor to lay back too far which will damage the bow shroud of these particular boats.  The 2.5 will lift the back of the motor to give clearance while still offering some adjustment. *It can work on other brand\/model boats that may not need a full five degree adjustment. **Our wedges are not compatible with quick release brackets** All sales final on wedges so please make sure you’re ordering the correct wedge for your particular situation. All of our wedges are designed to use the inside hole patterns on most major brand trolling motor mounts. They will not accommodate the outside mounting holes that are sometimes found along the very outside edges of some motor mounts\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":48341282062490,"sku":"AMP-2-5-DGR","price":235.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/2493\/9674\/files\/2.5DegreeLevelingWedge.png?v=1783554959"},{"product_id":"1-25-ultrex-fortrex-ghost-force-move-quest-spacer","title":"1.25” Ultrex\/Fortrex\/Ghost\/Force\/MOVE\/Quest Spacer","description":"\u003cp\u003e1.25” Ultrex\/Fortrex\/Ghost\/Force\/Power Pole Move\/QUEST Spacer This is a one piece solid spacer designed to help give your trolling motor clearance over your bow panel shroud Drilled to the same bolt pattern as the major brand trolling motors listed above. All of our spacers are designed to use the inside hole patterns on most major brand trolling motor mounts. They will not accommodate the outside mounting holes that are sometimes found along the very outside edges of some motor mounts\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":48341282291866,"sku":"XN-1-LTR-FRT","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/2493\/9674\/files\/1.25_WedgeSpacer.png?v=1783555500"},{"product_id":"bullet-xrs-leveling-wedge","title":"Bullet XRS Leveling Wedge","description":"\u003cp\u003eNOTE: If you’re mounting your motor TN STYLE then you do not need this wedge. You will need our standard 5 Degree leveling wedge. Bullet XRS Leveling Wedge This is the answer to so many Bullet XRS owners issue!  A perfect solution to mounting your trolling motor and actually keeping it clean and sleek!  Not only does the XRS wedge get your motor mounted easier, it also gives it a little lift to level your trolling motor when it’s deployed in the water.  This will cause your sonar to read more true beneath  your feet rather than tucked under the bow of your boat.  The leveling wedge has been a huge hit for other boat brands but now we are thrilled to offer the Bullet Boat world a prime product to fix an irritating issue.  (Please see the last 3 photos above to understand how this wedge mounts on the bow.)This wedge gives you vertical adjustment along with a solid flat platform to mount your trolling motor on to.  They will work with PP MOVE, ULTREX QUEST, Lowrance Ghost, Garmin Force, Ultrex, Fortrex and Motorguide Tour Pro motors. If you are installing a 52\" or longer motor you may need to add one of our 1\/4\" spacers to ensure clearance.  Check to see if your motor bracket will hit the top cap of your boat if the motor is laid back 2\".  If so, then you may want to consider picking up the 1\/4\" spacer (found in this same leveling wedge\/spacer category on the website). NOTE for all Power Pole MOVE and Ultrex QUEST users: This wedge will work with the 45” versions of these motors without the need for a spacer. The MOVE will have approximately 3” of overhang on the front end. The ULTEX QUEST will have approximately 1\/2” of overhang on each side of the wedge. All sales final on wedges (if you’re mounting a motor with a shaft longer than 47”, you may want to consider picking a couple of the bullet wedge spacers to make sure you have clearance once the motor is laid back by the wedge.) (this will NOT work on a SST Bullet boat) All of our wedges are designed to use the inside hole patterns on most major brand trolling motor mounts. They will not accommodate the outside mounting holes that are sometimes found along the very outside edges of some motor mounts\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":48341282947226,"sku":"BLL-XRS-LVL-WDG","price":235.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/2493\/9674\/files\/BulletXRSLevelingWedge.png?v=1783554651"},{"product_id":"1-4-wedge-spacer","title":"1\/4\" wedge spacer","description":"\u003cp\u003eThis spacer was designed to fit between the wedge and the trolling motor base to lift the motor up just a little. In case the back right corner of your motor base is too close to the fiberglass for your comfort, this will raise it just enough to give you peace of mind.  We really have seen this with the Garmin Force motors more than anything but wanted to make them available  to anyone who may like to add them on. All of our spacers are designed to use the inside hole patterns on most major brand trolling motor mounts. They will not accommodate the outside mounting holes that are sometimes found along the very outside edges of some motor mounts \u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":48341283045530,"sku":"BLL-WDG-SPC","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/2493\/9674\/files\/1.4_WedgeSpacer.png?v=1783555523"},{"product_id":"bullet-xd-series-leveling-mounting-wedge","title":"Bullet XD Leveling Wedge","description":"\u003cp\u003eNOTE: If you’re mounting your motor TN STYLE then you do not need this wedge. You will need our standard 5 Degree leveling wedge. Bullet XD series leveling\/mounting wedge The BULLET XD Series MOUNTING WEDGE!!! This wedge gives you vertical adjustment along with a solid flat platform to mount your trolling motor on to.  They will work with PP MOVE, ULTREX QUEST, Lowrance Ghost, Garmin Force, Ultrex, Fortrex and Motorguide Tour Pro motors. If you are installing a 52\" or longer motor you may need to add one of our 1\/4\" spacers to ensure clearance.  Check to see if your motor bracket will hit the top cap of your boat if the motor is laid back 2\".  If so, then you may want to consider picking up the 1\/4\" spacer (found in this same leveling wedge\/spacer category on the website). NOTE for all Power Pole MOVE and Ultrex QUEST users: This wedge will work with the 45” versions of these motors without the need for a spacer. The MOVE will have approximately 3” of overhang on the front end. The ULTEX QUEST will have approximately 1\/2” of overhang on each side of the wedge. All sales final on wedges (this will NOT work on a SST Bullet boat) All of our wedges are designed to use the inside hole patterns on most major brand trolling motor mounts. They will not accommodate the outside mounting holes that are sometimes found along the very outside edges of some motor mounts\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":48341283930266,"sku":"BLL-XD-SRS-LVL","price":235.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/2493\/9674\/files\/BulletXDLevelingWedge.png?v=1783554815"},{"product_id":"1-8-degree-leveling-wedge","title":"1.8 Degree Leveling Wedge","description":"\u003cp\u003eThis is the all new 1.8 Degree Leveling Wedge. For those who need just the right amount of adjustment to get your trolling motor level, this is a great option. Not everyone needs a full 1” to 2+” adjustment to get level so this new 2 degree leveling wedge is going to fill that void. NOTE: The PP MOVE will have approximately 3” of overhang on the front end. The ULTEX QUEST will have approximately 1\/2” of overhang on each side of the wedge. The leveling wedge will work with Ultrex, Ultrex Quest, MinnKota Fortrex, Lowrance Ghost, Garmin Force, PP MOVE This item includes all hardware for installation. *Our wedges are not compatible with quick release brackets* All sales final on leveling wedges so please make sure you make the correct selection for your particular needs. All of our wedges are designed to use the inside hole patterns on most major brand trolling motor mounts. They will not accommodate the outside mounting holes that are sometimes found along the very outside edges of some motor mounts\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":48341289009306,"sku":"AMP-2-DGR-LVL","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/2493\/9674\/files\/1.8degreewedge.png?v=1783555548"}],"url":"https:\/\/ashmoremarine.com\/collections\/leveling-wedges-spacers.oembed","provider":"Ashmore Marine","version":"1.0","type":"link"}