Bullet XRS Leveling Wedge

NOTE: If you’re mounting your motor TN STYLE then you do not need this wedge. You will need our standard 5 Degree leveling wedge. Bullet XRS Leveling Wedge This is the answer to so many Bullet XRS owners issue! A perfect solution to mounting your trolling motor and actually keeping it clean and sleek! Not only does the XRS wedge get your motor mounted easier, it also gives it a little lift to level your trolling motor when it’s deployed in the water. This will cause your sonar to read more true beneath your feet rather than tucked under the bow of your boat. The leveling wedge has been a huge hit for other boat brands but now we are thrilled to offer the Bullet Boat world a prime product to fix an irritating issue. (Please see the last 3 photos above to understand how this wedge mounts on the bow.)This wedge gives you vertical adjustment along with a solid flat platform to mount your trolling motor on to. They will work with PP MOVE, ULTREX QUEST, Lowrance Ghost, Garmin Force, Ultrex, Fortrex and Motorguide Tour Pro motors. If you are installing a 52" or longer motor you may need to add one of our 1/4" spacers to ensure clearance. Check to see if your motor bracket will hit the top cap of your boat if the motor is laid back 2". If so, then you may want to consider picking up the 1/4" spacer (found in this same leveling wedge/spacer category on the website). NOTE for all Power Pole MOVE and Ultrex QUEST users: This wedge will work with the 45” versions of these motors without the need for a spacer. The MOVE will have approximately 3” of overhang on the front end. The ULTEX QUEST will have approximately 1/2” of overhang on each side of the wedge. All sales final on wedges (if you’re mounting a motor with a shaft longer than 47”, you may want to consider picking a couple of the bullet wedge spacers to make sure you have clearance once the motor is laid back by the wedge.) (this will NOT work on a SST Bullet boat) All of our wedges are designed to use the inside hole patterns on most major brand trolling motor mounts. They will not accommodate the outside mounting holes that are sometimes found along the very outside edges of some motor mounts